FX Classic Twist Throttle

The throttle is the only part of the bike you touch every single second you ride, and on most e-motos it is the cheapest part fitted — an injection-moulded plastic housing over a budget sensor. Vague off the bottom, notchy through the mid, and prone to dead spots as it wears.

The FX Classic replaces the whole assembly. A CNC-machined 6061-T6 billet housing with a genuine Honeywell Hall effect sensor gives you linear, predictable power delivery with zero flex and zero slop. Stocked here in Australia — no three-week wait and no surprise customs bill.

Key Specifications

Body: CNC-milled 6061-T6 billet aluminium, ±0.01mm tolerance, ~85g
Sensor: Genuine Honeywell Hall effect, 0.87V–4.2V linear output
Rotation: 65° short throw — faster power access, less wrist strain
Spring tension: 3 adjustable settings (light / medium / firm), ships on medium
Bearing: 440C stainless steel, pressed into the housing
Fasteners: Grade 5 titanium (Ti-6Al-4V), silver finish
Weather rating: IP65 — sealed against dust and water
Bar diameter: 7/8" (22.2mm)
Wire lead: 120cm
Finish: Anodised Black or Silver — anodising is part of the metal, so it will not chip, peel or fade

Choose Your Bike

Every throttle ships pre-wired with the correct connector for your bike. Select it above.

Surron Light Bee X — the standard Surron triangular connector. Plug-and-play on the stock controller, and the same plug also fits Segway X160 / X260, Talaria MX3, eRide Pro S / 2.0 / 3.0 / SR, Throne Strike Shadow, Yozma IN 10 and Tuttio Solei 01 (adapter required). On Talaria MX3 and eRide Pro S / 2.0 you tie the start-button wires together or fit a momentary handlebar button; on eRide Pro 3.0 / SR you can instead disable the start button in the eRide Pro app.
Surron Ultra Bee — the same Surron connector, supplied on the shorter Ultra Bee lead.
Talaria XXX / MX4 / MX5 — plug-and-play 5-pin green connector. The start button is bypassed inside the supplied FX cable. Trim the tubing on the controller-side connector flush with the green face for a proper fit.

Running an aftermarket controller — EBMX X-9000, Torp, Ventus, Fardriver, BAC4000 / BAC855 / BAC8000 or VESC? The throttle works with all of them. Anything running a Surron plug uses the Surron Light Bee X option and simply needs the throttle range calibrated in your controller app. Fardriver, BAC and VESC setups have no connector supplied by FX, so you twist or solder your own.

Check the fit guide image above for the full compatibility list — including platforms such as Y-Volt Surge V, Altis Sigma, Ventus 1+, Arctic Leopard, MACFOX, P-51, 79Bike, Bonnell 775MX, Zooz and Juiced, which the FX Classic fits but which need a cable we don't hold in stock. Message us before ordering and we'll tell you straight.

What's in the Box

FX Classic Twist throttle in your chosen finish
Pre-wired connector for your selected bike
Grade 5 titanium screw set (5 screws)
FX stickers
Installation instructions
FREE decal with every parts order

Warranty

12-month FX manufacturer warranty.

Your cart is empty